Hyundai Veloster Owners Manual

Rear combination light bulb replacement
Maintenance / Light bulbs / Rear combination light bulb replacement

Hyundai Veloster: Rear combination light bulb replacement. (1) Stop and tail light

(1) Stop and tail light
(2) Back-up light
(3) Rear turn signal light
(4) Tail light

Outside

Hyundai Veloster: Rear combination light bulb replacement. 1. Open the tailgate.

1. Open the tailgate.
2. Loosen the outside light assembly retaining screws with a cross-tip screwdriver.
3. Remove the rear combination light assembly from the body of the vehicle.
4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
5. Remove the bulb from the socket.
6. Insert a new bulb by inserting it into the socket and pushing or rotating it until it locks into place.
7. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
8. Reinstall the light assembly to the body of the vehicle.
9. Tighten the screws.


© 2018 www.hyundaivelostermanuals.org. All Rights Reserved.